After-sales Service: | Online Service |
---|---|
Warranty: | 1 Year |
Condition: | New |
Automation: | Automatic |
Treatment: | Forced Air Cooling |
Transport Package: | Standard Export Package |
Customization: |
---|
Suppliers with verified business licenses
Low temperature residual heat dryer
Technical Parameter | |||||
Model | HYSS5000 | HYSS10000 | HYSS15000 | HYSS20000 | HYSS25000 |
Standard dehumidification capacity/24 hours | ~5000kg | ~10000kg | ~15000kg | ~20000kg | ~25000kg |
Standard dehumidification capacity/h | ~208kg | ~416kg | ~624kg | ~832kg | ~1040kg |
Operating power | 13kw | 26kw | 39kw | 52kw | 65kw |
Standard heating conditions | 90 ºC/70 ºC (hot water, steam condensate, etc.) | ||||
Hot water flow rate | 8.6m3/h | 17.2m3/h | 25.8m3/h | 34.4m3/h | 43m3/h |
Cooling conditions | 33 ºC/45 ºC (softened water) | ||||
Cooling water flow rate Δ t=15 ºC | 13m3/h | 26m3/h | 39m3/h | 52m3/h | 65m3/h |
Heat exchange module | 1tower | 2towers | 3towers | 4towers | 5towers |
Power supply | (200V\380V\440V)/3H/50Hz(60Hz) | ||||
Drying temperature | 50~65ºC(Return air),68~85ºC(Air supply) | ||||
heat source | Steam, flue gas waste heat (heat exchange), steam condensate, etc | ||||
control system | Touch screen+PLC programmable control room | ||||
Applicable scope of wet mud | Moisture content(30%~85%)(Different materials have different adaptability to moisture content) | ||||
Moisture content of dry materials | Frequency conversion adjustment, moisture content (5%~55%) (different material properties result in different drying effects) | ||||
Forming method | Cutting, squeezing, and granulation (different material properties, suitable for different forming methods) | ||||
Boundary dimension mm | 4560*3110*3200 | 7900*3100*3201 | 11150*3110*3202 | 14400*3110*3203 | 17650*3110*3204 |
Structural style | Complete installation | Assemble | Assemble | Assemble | Assemble |
Weight | 5.8T | 8.8T | 12.5T | 15T | 16.7T |
Energy saving low-temperature box dryer
The low-temperature box dryer is specifically designed for materials or block materials that are dehydrated using a pressure filter. It uses the principle of a low-temperature dehumidification heat pump to use hot air circulation for dehumidification and drying of materials. It collects the latent heat of water vapor and air humidity in the return air during the dehumidification and drying process, achieving the cyclic utilization of latent heat; The entire process has no waste heat emissions, energy conservation and environmental protection, no heat loss, and 100% recycling of latent heat.Technical Parameter | |||
Model | HXSS200FL | HXSS400FL | HXSS800FL |
Heat pump dehumidification capacity/24 hours | 200kg | 400kg | 800kg |
Heat pump dehumidification capacity/h | 6~10kg/h | 12~18kg/h | 20~35kg/h |
Operating power | 3.5kw | 6.0kw | 12kw |
Efficiency ratio | 2.0-3.3kg.H2O/kw.H | ||
Number of compressors | 1tower | ||
Cooling method | Forced air cooling FL | ||
Cryogen | R134a | ||
Power supply | (200V\380V\440V)/3H/50Hz(60Hz) | ||
Drying temperature | 40~55ºC(Return air),60~85ºC(Air supply) | ||
Control system | Touch screen+PLC programmable control room | ||
Moisture content of dry materials | 20%-50% | ||
Boundary dimension mm | 1700*1200*1500 | 2300*1400*1700 | 2700*1600*2000 |
Structural style | Complete installation | Complete installation | Complete installation |
Weight | 600kg | 950kg | 1480kg |
Heat pump dehumidification ability: Due to significant differences in dehumidification ability due to material properties, molding effect, drying water content, dust amount, etc., the dehumidification ability of a heat pump does not represent weight reduction by removing water; please consult for actual results. |
Suppliers with verified business licenses