Wood Timber Dewatering Drying Logs Boards Treatment Steam Chamber Dryer

Product Description

Wood Timber Dewatering Drying Logs Boards Treatment Steam Chamber Dryer

Product Description

1. Drying System Working Principle
During operation, fuel is fully combusted in the combustion chamber to generate high-temperature hot air (>180°C), which is circulated into the drying chamber by fans for wood drying. An independent steam humidification system rapidly balances internal/external moisture, preventing cracks and deformation to improve yield.

2. Intelligent Control System
Adjustable valves on air intake/exhaust ducts precisely regulate airflow and pressure.
Steam valves control spray volume, while auxiliary burners ensure stable combustion to meet phase-specific temperature requirements.

Product Parameters

No.	Name	Description	QTY
Model: GYZCM-2
1	Box	1. Drying products: suitable for drying and drying of all kinds of wood, as well as wood sterilization, insecticide and wood heat treatment. 2. Headroom length: 4.50 meters, width: 4.00 meters, height: 4.00 meters. 3. Material of drying box: The inner wall is all aluminum for corrosion resistance and high temperature resistance. The outer wall is colored steel plate, and the middle is insulated by fiber cotton.	1pc
Heat source system of wood drying equipment
1	Boiler	1. 200,000 kcal boiler heating (special for wood or coal). 2. The material is: special steel plate welded into wood special hot air drying furnace (forced type, furnace outlet temperature 180°-200°, the main fuel is: wood or coal. Thermal insulation boiler material: all steel boiler special steel plate). 3.The wall thickness of the steel plate of the furnace body is 8cm and the wall thickness of the seamless steel pipe is 10mm.	1pc
2	Steam generator	1.Material is: special steel plate welded. 2.Thickness: 8mm.	1set
3	Chimney	1.Material: special steel plate welded. φ240mm, length: 6700mm, each section 3350mm. 2.Diameter 280mm, wall thickness 2mm.	2sections
4	Automatic exhaust steam raft	Material: special cast iron.	1pc
5	Glass tube	φ20mm, length: 450mm.	2pcs
6	Priming box	The thickness is 8.0mm and the water capacity is 200L. Material is: special steel plate welded.	1set
7	faucet	Material: cast steel type.	1pc
8	Steam valve	Material: Cast iron type.	1pc
9	Water bucket	Material: steel plate type.	1pc
Piping system of wood drying equipment
1	Air inlet duct	Φ240mm. Material: all steel welded.	1set
2	Return air duct	Φ240mm. Material: all steel welded.	1set
3	Recycle one	Φ240mm. Material: all steel welded.	1set
4	bend	Φ240mm. Material: all steel welded.	4pcs
5	Tuyere iron plate	Φ240mm. Material: all steel welded.	1set
6	Air inlet duct flange	Φ240mm. Material: all steel welded.	1set
7	Return air duct flange	Φ240mm. Material: all steel welded.	1set
8	Heat dissipation pipe inside the box	Φ240mm. Material: all steel welded.	1set

Why choose us

Other Types

15m³Wood Vacuum Dryer
Principles of Vacuum Wood Drying:
Lower Boiling Point: Under vacuum, water boils at a lower temperature, enabling faster evaporation and low-temperature drying.
Moisture Migration:
Surface moisture evaporates into the air.
Internal moisture moves faster toward the surface (vacuum increases moisture gradient, preventing surface cracking).
Temperature Effect: Evaporative cooling on the surface further enhances internal moisture movement.
Key Advantage: Efficient drying at low temperatures with reduced cracking risk.
Technical Parameters

Model	MX-15
Main machine size (L*W*H)	15*2.1*2.2 M
Configure of wood vacuum dryer	1-Fully automatic P2C touch screen microcomputer control cabinet *1 set. 2-Vacuum pump *1 set. 3--Water ring vacuum pump *1 set. 4-Vacuum pump water tank *1 set. 5-Vacuum pump water inlet solenoid valve *1 set. 6-Vacuum pump intake valve solenoid valve * 1 set. 7-Exhaust solenoid valve *2 sets. 8-Drain solenoid valve *2 sets. 9-Dryer air supply solenoid valve *1 set. 10-High temperature line *1 set. 11-Screen closed line *1 set. 12-Special moisture meter for wood *1 set. 13-Stainless steel probe *8pcs.          14-High temperature fan *1 set. 15-Heating system *1 set. 16-Track car*1 set. 17-PC100 *1 set.     18-Electric control box bracket *1 set. 19-Pressure gauge *1 set.                           20-Pressure sensors *1 set.                   21-Manual valve *1 set.                              22-Vacuum motor *1 set.

Raw Material and Final Product

Packaging & Shipping

Company Profile

1.We can provide you the one year warranty but without the spare parts for our wood drying equipment.
2.The professional and timely 24 hours after-sale service.
3.The relative video of the wood drying machine installation and instruction will be provided for you.
4.We can also meet the special voltage demand.
5.The engineer is available to service machinery oversea.

FAQ

Q1:How can I pay my order?
-----We can accept payment through Payment terms: T/T; L/C; Western Union; Money Gram.
Q2:What's the certification of our wood drying machine?
------CE Certification.
Q3: How to pack the products?
------We will use standard export package.
Q4:How to install after the equipment arriving destination?
------We will provide detailed illustrations for you.
Q5:How long is the warranty?
------The warranty is 1 year (except spare parts and artificial damage).
Pls Click "" ask for Catalog & EXW Price of Our Wood Drying Machines