Firewood Coal Heating Birch Oliver Wood Timber Drying Dryer for Woodworking Factories

Product Description

Firewood Coal Heating Birch Oliver Wood Timber Drying Dryer for Woodworking Factories

Product Description

1.Description
1)Drying System Working Principle
During operation, fuel is fully combusted in the combustion chamber to generate high-temperature hot air (>180°C), which is circulated into the drying chamber by fans for wood drying. An independent steam humidification system rapidly balances internal/external moisture, preventing cracks and deformation to improve yield.
2) Intelligent Control System
Adjustable valves on air intake/exhaust ducts precisely regulate airflow and pressure.
Steam valves control spray volume, while auxiliary burners ensure stable combustion to meet phase-specific temperature requirements.
2.Configuration table of Wood drying box (forklift feeding)

No.	Name	Description	QTY
Model: GYZCM-05
1	Box	1. Drying products: suitable for drying and drying of all kinds of wood, as well as wood sterilization, insecticide and wood heat treatment. 2. Headroom length: 3.50 meters, width: 2.00 meters, height: 2.30 meters. 3. Drying box material: middle insulation fiber cotton insulation.	1pc
Heat source system
1	Boiler	1. Boiler heating (special for wood or coal). 2. The material is: special steel plate welded into wood special hot air drying furnace (forced type, furnace outlet temperature 180°-200°, the main fuel is: wood or coal. Thermal insulation boiler material: all steel boiler special steel plate). 3.The wall thickness of the steel plate of the furnace body is 8cm and the wall thickness of the seamless steel pipe is 10mm.	1pc
2	Steam generator	1.Material is: special steel plate welded. 2.Thickness: 8mm.	1set
3	Chimney	1.Material: special steel plate welded. φ240mm, length: 6700mm, each section 3350mm. 2.Diameter 280mm, wall thickness 2mm.	2sections
4	Automatic exhaust steam raft	Material: special cast iron.	1pc
5	Glass tube	φ20mm, length: 450mm.	2pcs
6	Priming box	The thickness is 8.0mm and the water capacity is 200L. Material is: special steel plate welded.	1set
7	Faucet	Material: cast steel type.	1pc
8	Steam valve	Material: Cast iron type.	1pc
9	Water bucket	Material: steel plate type.	1pc
Piping system
1	Air inlet duct	Φ210mm. Material: all steel welded.	1set
2	Return air duct	Φ210mm. Material: all steel welded.	1set
3	Recycle one	Φ210mm. Material: all steel welded.	1set
4	bend	Φ210mm. Material: all steel welded.	4pcs
5	Tuyere iron plate	Φ210mm. Material: all steel welded.	1set
6	Air inlet duct flange	Φ210mm. Material: all steel welded.	1set
7	Return air duct flange	Φ210mm. Material: all steel welded.	1set
8	Heat dissipation pipe inside the box	Φ210mm. Material: all steel welded.	1set
Fan system
1	High temperature main fan	Power 1.5KW. Material: all carbon steel.	1pc
2	High temperature and high humidity axial flow fan	Power 0.55KW. Material: All aluminum.	1pc
Prosecution system
1	Air outlet temperature gauge	Material: stainless steel, temperature at 300C°.	1pc
2	Thermoelectric couple	Stainless steel.	1pc
3	thermometer	Stainless steel.	1pc
4	Electric control cabinet	Fully automatic control.	1pc
Tide drainage system
1	Tide window	Material: all steel welded φ300mm.	2sets
2	Tide drainage machine	Material: Automatic model.	2sets
Two layers in kiln
1	Deflector	Material: All aluminum.	1set
2	Draught board	Material: All aluminum.	1set
3	Baffle frame	Material: All steel.	1set
4	Windshield frame	Material: All steel.	1set
Insulated door
1	Insulated door	Material of drying box: middle insulation fiber cotton insulation.	1set
2	Door opener	Material: All steel.	1set
3	Door member	Material: All steel.	1set
4	Gate hinge	Material: All steel.	1set

Other Types

5m³ Wood Carbonization Kiln
Wood carbonization equipment work description: Carbonized wood is put into a relatively closed environment, its high temperature (180-230 ºC) treatment, and get a part of the carbon characteristics of the wood, and is called carbonized wood. Andthere are many advantages ofwood carbonization equipment.
Characteristics of charred wood:
1)Environmentally friendly and safe
2)Increased moisture resistance
3)Improved dimensional stability, not easy to deform
4)Significantly improved corrosion resistance and weather resistance
5)Beautiful and durable color, consistent inside and outside, and can simulate the color of valuable tree species.
6)Resin and other extractives volatile, conducive to surface finishing and gluing.
7)Mechanical properties of wood carbonization klin are changed:
8)Easy to store: the hygroscopicity of carbonized wood is significantly reduced, so there is no need to control temperature and humidity in the warehouse
Product Parameters:

No.	Name	QTY
1	Carbonization kiln: 5.00 meters long, 2.20 meters high, 2.00 meters wide	1pc
2	Fully automatic P2C touch screen microcomputer control cabinet	1pc
3	High temperature carbonization special high temperature fan 1.10KW	2pcs
4	Deflector	1pc
5	Draught board	1pc
6	Baffle bracket	1pc
7	Windshield support	1pc
8	Automatic exhaust pipe	2pcs
9	Priming box	2pcs
10	Automatic drain valve	1pc
11	High-temperature wire	1set
12	Closed line	1set
13	Moisture meter for wood	1pc
14	Stainless steel probe	8pcs
15	Hand valve	1pc
16	Heating system 31.5KW	2sets
17	Rail car	1pc
18	Temperature sensor	1set
19	Electric control box bracket	1set
20	Thermometer	1pc
21	Rail car bracket	1set
22	Drain	1set

Recommended Products

Raw Material and Final Product

Packaging & Shipping

Company Profile

After Sales Service

1.We can provide you the one year warranty but without the spare parts.
2.The professional and timely 24 hours after-sale service.
3.The relative video of the wood drying machine installation and instruction will be provided for you.
4.We can also meet the special voltage demand.
5.The engineer is available to service machinery oversea.

FAQ

Q1:How can I pay my order?
-----We can accept payment through Payment terms: T/T; L/C; Western Union; Money Gram.
Q2:What's the certification of our wood drying machines?
------CE Certification.
Q3: How to pack the products?
------We will use standard export package.
Q4:How to install after the wood drying equipment arriving destination?
------We will provide detailed illustrations for you.
Q5:How long is the warranty?
------The warranty is 1 year (except spare parts and artificial damage).
Pls Click "SEND" ask for Catalog & EXW Price of Wood Drying Equipment.