| Customization: | Available |
|---|---|
| After-sales Service: | Online Support |
| Warranty: | 1 Year |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Model | MX-10 |
| Main machine size (L*W*H) | 10.8*2.1*2.2 M (Including vacuum system) |
| Vacuum pump power | 7.5KW |
| Heating system power | 36KW |
| Configure | 1-Fully automatic P2C touch screen microcomputer control cabinet *1 set. 2-Water ring vacuum pump *1 set. 3-Vacuum pump water tank *1 set. 4-Vacuum pump water inlet solenoid valve *1 set. 5-Vacuum pump intake valve solenoid valve * 1 set. 6-Exhaust solenoid valve *2 sets. 7-Drain solenoid valve *2 sets. 8-Dryer air supply solenoid valve *1 set. 9-High temperature line *1 set. 10-Screen closed line *1 set. 11-Special moisture meter for wood *1 set. 12-Stainless steel probe *8pcs. 13-High temperature fan*1 set. 14-Track car*1 set. 15-PC100 *1 set. 16-Electric control box bracket *1 set. 17-Pressure gauge *1 set. 18-Pressure sensors *1 set. 19-Manual valve *1 set. 20-Vacuum motor *1 set. |
| No. | Name | Description | QTY |
| Model: GYZCM-60 | |||
| 1 | Box | 1. Drying products: suitable for drying and drying of all kinds of wood, as well as wood sterilization, insecticide and wood heat treatment. 2. Headroom length: 7.00 meters, width: 6.00 meters, height: 4.50 meters. 3. Material of drying box: The inner wall is all aluminum for corrosion resistance and high temperature resistance. The outer wall is colored steel plate, and the middle is insulated by fiber cotton. |
1pc |
| Heat source system | |||
| 1 | Boiler | 1)600,000kcal boiler heating (special for wood or coal). 2)The material is: special steel plate welded into wood special hot air drying furnace (forced type, furnace outlet temperature 180°-200°, the main fuel is: wood or coal. Thermal insulation boiler material: all steel boiler special steel plate). 3)The steel plate wall thickness of the furnace body is 8cm, and the seamless steel pipe wall thickness is 10mm. |
1pc |
| 2 | Steam generator | 1.Material is: special steel plate welded. 2.Thickness: 8mm. |
1set |
| 3 | Chimney | 1.Material: special steel plate welded. φ240mm, length: 6700mm, each section 3350mm. 2.Diameter 280mm, wall thickness 2mm. |
2sections |
| 4 | Automatic exhaust steam raft | Material: special cast iron. | 1pc |
| 5 | Glass tube | φ20mm, length: 450mm. | 2pcs |
| 6 | Priming box | The thickness is 8.0mm and the water capacity is 200L. Material is: special steel plate welded. | 1set |
| 7 | Faucet | Material: cast steel type. | 1pc |
| 8 | Steam valve | Material: Cast iron type. | 1pc |
| 9 | Water bucket | Material: steel plate type. | 1pc |
| No. | Name | QTY |
| 1 | Carbonization kiln: 6.00 meters long, 2.20 meters high, 2.00 meters wide | 1pc |
| 2 | Fully automatic P2C touch screen microcomputer control cabinet | 1pc |
| 3 | High temperature carbonization special high temperature fan 1.5KW | 2pcs |
| 4 | Deflector | 1pc |
| 5 | Draught board | 1pc |
| 6 | Baffle bracket | 1pc |
| 7 | Windshield support | 1pc |
| 8 | Automatic exhaust pipe | 2pcs |
| 9 | Priming box | 2pcs |
| 10 | Automatic drain valve | 1pc |
| 11 | High-temperature wire | 1set |
| 12 | Closed line | 1set |
| 13 | Moisture meter for wood | 1pc |
| 14 | Stainless steel probe | 8pcs |
| 15 | Hand valve | 1pc |
| 16 | Heating system 75KW(Average electricity consumption is about 50%) | 1set |
| 17 | Rail car | 1pc |
| 18 | Temperature sensor | 1set |
| 19 | Electric control box bracket | 1set |
| 20 | Thermometer | 1pc |
| 21 | Rail car bracket | 1set |
| 22 | Drain | 1set |
Normally, we adopt wooden case or container.If export to European countries,the wooden box will be fumigated.If container is too small,we will use PE film for packing or pack it according to customers special request.
1.We can provide you the one year warranty but without the spare parts.
| Q1:What's the certification of oil press machine? ------CE Certification. |
| Q2:What's the warranty of this machine? ------Warranty:1 Year(except spare parts). |
| Q3: What's your payment terms? ------Payment terms: T/T; L/C; Western Union; Money Gram. |
){kind=link}