Redwood Rosewood Wood Vacuum Drying Equipment Timber Logs Vacuum Dryer

Product Description

Redwood Rosewood Wood Vacuum Drying Equipment Timber Logs Vacuum Dryer

Product Description

1)Drying System Working Principle
1) Vacuum drying box is a method of drying wood stacked in an airtight container under conditions below atmospheric pressure. Under vacuum conditions, the boiling point of water is lowered and the evaporation rate is accelerated, which can accelerate the drying speed of wood at a lower temperature.
2) In the drying process, the surface of the wood moisture to the surrounding air evaporation; internal moisture constantly moving to the surface. So to speed up the drying speed, try to speed up the movement of moisture within the wood, in order to prevent the wood due to the rapid evaporation of internal moisture, the surface of the moisture content gradient increases and triggered by the surface cracking.
3) In order to solve the problem of heating the wood when vacuum drying, break the heating of the way vacuum drying. Vacuum drying can eliminate the surface hardening and cracking phenomenon that is easy to produce in the case of atmospheric pressure drying.
4)Under low-pressure conditions, oxygen in the drying medium, less discoloration of the material caused by thermal action and oxidation, basically can maintain the natural color of the material.

Product Parameters

Model	MX-20
Main machine size (L*W*H)	15*2.5*3 M
Fully automatic P2C touch screen microcomputer control cabinet	1 set
Vacuum pump of dryer	2 set
Water ring vacuum pump	2 set
Vacuum pump water tank	2 set
Vacuum pump water inlet solenoid valve	2 set
Vacuum pump intake valve solenoid valve	2 set
Exhaust solenoid valve	2 sets
Drain solenoid valve	2 sets
Dryer air supply solenoid valve	1 set
High temperature line	1 set
Screen closed line	1 set
Special moisture meter for wood	1 set
Stainless steel probe	8 pcs
High temperature fan	6 set
Heating system	6 set
Track car	1 set
PC100	1 set
Electric control box bracket	1 set
Pressure gauge	1 set
Pressure sensors	1 set
Manual valve	1 set
Vacuum motor	1 set

Other Types

1)Drying System Working Principle
During operation, fuel is fully combusted in the combustion chamber to generate high-temperature hot air (>180°C), which is circulated into the drying chamber by fans for wood drying. An independent steam humidification system rapidly balances internal/external moisture, preventing cracks and deformation to improve yield.
2) Intelligent Control System
Adjustable valves on air intake/exhaust ducts precisely regulate airflow and pressure.
Steam valves control spray volume, while auxiliary burners ensure stable combustion to meet phase-specific temperature requirements.
2.Technology Specification of Wood Dryer:

No	Name	Description	QTY
Model: GYZCM-05(Electric heating)
1	Box	The drying chamber dimensions are 3500mm in length, 2000mm in width, and 2300mm in height. The operating temperature range is 40°C to 100°C. The temperature inside the drying chamber can be automatically adjusted to meet customer requirements. Drying chamber material: The center section is insulated with fire-resistant, high-temperature rock wool.	1set
Heat source system
1	Boiler	Electric heating drying system. 2) Material: Specially designed for high-temperature drying. 3) Electric heating: Stops at high temperatures and automatically restarts at low temperatures, creating a fully automatic drying control system.	1set
2	Heating bracket	Material: Welded from specialized steel plates.	1set
3	High-temperature wire	Material: High-temperature silicone wire capable of exceeding 200°C.	1set
4	Heating fixing wire	Material: High-strength wire.	1set
5	Fully automatic control system	Material: Used with Chint components and the main electrical control cabinet.	1set
Fan system
1	High temperature fan	Power 0.55KW. Material: all carbon steel	1set
Inspection and Control System
1	Thermometer	Full infrared digital display	1set
2	Electrical control cabinet	Fully automatic temperature control	1set
Tidal drainage system
1	Dehumidification system	Material: All-steel welded, φ240mm	1pc
2	Steel wire rope	Material: Oil rope	1pc
3	Cock	Material: All-copper	2pcs
4	Dehumidification hole hook	Material: Steel, thickness 2mm	2pcs
5	Dehumidification hole support rod	Material: Steel, thickness 2mm	2pcs
Second layer
1	Deflector frame	Material: All-steel	1set
2	Wind deflector frame	Material: All-steel	1set
3	Deflector	Material: All-aluminum	1set
4	Wind deflector	Material: All-aluminum	1set
Insulated door
1	Insulated door	Material: Insulated with fiber-insulated insulation	1set
2	Door opener	Material: All steel.	1set
3	Door member	Material: All steel.	1set
4	Gate hinge	Material: All steel.	1set

Raw Material and Final Product

Packaging & Shipping

Company Profile

After Sales Service

1.We can provide you the one year warranty but without the spare parts for our wrapping machine for wood drying machines.
2.The professional and timely 24 hours after-sale service.
3.The relative video of the wood drying machine installation and instruction will be provided for you.
4.We can also meet the special voltage demand.
5.The engineer is available to service machinery oversea.
FAQ
Q1:Which wood dryer do we offer?
-----wood drying box, wood vacuum drying equipment, wood carbonization kiln.
Q2:What's the certification of our wrapping machine?
------CE Certification.
Q3: How to pack the products?
------We will use standard export package.
Q4:How to install after the equipment arriving destination?
------We will provide detailed illustrations for you.
Q5:How long is the warranty ?
------The warranty is 1 year ( except spare parts and artificial damage).

Pls Click "SEND" ask for Catalog & EXW Price of Wood Drying Machines